Checked against official sources on 15 October 2026

How much does a Starlink Standard dish cost to run?

About $13 a month

for a Starlink Standard dish used 24 hours a day in , at 18.31 cents per kWh.

Draws while on
100 W
Costs per hour
$0.02

The Standard dish draws a lot more than the Mini, an average of 75–100 W according to Starlink, so it's worth knowing the cost if you leave it on all the time. It's also the figure to plan around if you want to keep it running through a power cut.

Starlink's specification sheet gives an average of 75–100 W. The calculator starts at the high end, on 24 hours a day; change it to match how you use it.

Work out your own Starlink Standard

Draws about 100 W

hours

cents per kWh

Per day$0.44
Per month$13
Per year$160

Low or high end

Starlink gives a range for average power use. Costs below use the price you set above.

Power draw Power while on Cost per hour
Low end of Starlink's average 75 W $0.01
High end of Starlink's average 100 W $0.02

Starlink Standard power specifications

SpecificationValue
Average power use 75–100 W
Snow melt capability Up to 40 mm (1.5 in) an hour

From Starlink's Standard kit specification sheet.

What it costs in other countries

For a Starlink Standard dish used 24 hours a day, at each country's official average electricity price.

CountryPrice per kWhPer monthPer year
United States18.31 cents$13$160
United Kingdom26.32 pence£19£231
Germany36.18 cents€26€317
Ireland38.71 cents€28€339
France24.85 cents€18€218
Spain25.09 cents€18€220
Italy31.42 cents€23€275
Netherlands24.40 cents€18€214

Prices from the U.S. EIA, Ofgem and Eurostat; see Sources below. To see another country, pick it at the top of the page; we cover 51.

How to cut the cost of running your Starlink Standard

  1. Switch it off overnight

    Turning it off for 8 hours a night, at the high end of Starlink's average, saves this much.

    Saves about $53 a year

  2. Clear snow if you can

    Melting snow on the dish takes extra power.

Savings use the electricity price you set above and figures from this page's sources.

What can power it

Starlink's specification sheet lists an average of 75–100 W for the Standard kit. Whatever powers it should cover the upper figure, plus anything else running at the same time.

Check a specific setup with the generator size calculator.

Common questions

How many watts does Starlink use?

Starlink's specification sheet lists an average of 75–100 W for the Standard kit. The smaller Starlink Mini averages 25–40 W.

How long will a power station run a Starlink Standard?

At Starlink's 75–100 W average, a 1,024 Wh power station with about 85% usable energy would run it for roughly 9 to 12 hours. Use the power station checker for your own model.

How does the Standard compare with the Starlink Mini?

Starlink lists 75–100 W for the Standard and 25–40 W for the Mini, so the Standard uses roughly two and a half to three times as much power.

How much does it cost to run a Starlink Standard per hour?

About $0.02 an hour in the United States, at the average price of 18.31 cents per kWh, or about £0.03 in the UK at 26.32 pence, for a Starlink Standard dish drawing 100 W.

Sources

Last checked 15 October 2026. How we get our numbers.